-=DVF=- Gaming Community http://www.dvf.org.uk/forums/ |
|
Xbox modchips http://www.dvf.org.uk/forums/viewtopic.php?f=5&t=2823 |
Page 8 of 8 |
Author: | Bob_The_Engineer [ Tue Apr 20, 2004 7:35 pm ] |
Post subject: | |
Author: | W.D.Piss [ Tue Apr 20, 2004 11:01 pm ] |
Post subject: | |
Author: | Worm [ Wed Apr 21, 2004 7:45 am ] |
Post subject: | |
Author: | JiBeRjAbEr [ Thu Apr 22, 2004 4:29 am ] |
Post subject: | |
Author: | Bob_The_Engineer [ Thu Apr 22, 2004 8:21 am ] |
Post subject: | |
Author: | Worm [ Thu Apr 22, 2004 9:18 am ] |
Post subject: | |
Author: | JiBeRjAbEr [ Thu Apr 22, 2004 5:50 pm ] |
Post subject: | |
Author: | jamie [ Thu Apr 22, 2004 10:21 pm ] |
Post subject: | |
Stick your xbox into one of these [img]http://www.bestplayer.de/images1/xbcry2[1].jpg[/img] |
Author: | jamie [ Thu Apr 22, 2004 10:26 pm ] |
Post subject: | |
Im waiting for these to drop in price a bit though. Would fit into my hifi rack nicely. Infact I may try to mod one into a tivo case. With a tivo in it! from http://www.bestplayer.de Check out this pigeon english description. Color: High-grade steel Mass: 430mm width 280mm depth and 90mm high This is the XBox Case high-grade steel sketched by us. Like the name suggest, the housing is high-grade steel powder-coated, those aluminum screen anodized. The housing is offered of us first as Showcase, there the EMV - examination is not yet final. The enterprise at 230 V is thus forbidden. On the rear we have place for: 1 x LPT 1 x VGA 1 x optical digitally out 1 x Cinch digitally out 2 x audio Cinch out 1 x Cinch video exit 1 x s-video exit On the demand side is a cutout for IR, on the side is two for USB - connections. In the housing one has place for 2 non removable disks and 2 exhausts. The price for the housing inclusive. Aluminum feet 125 euro with electronic construction units amount to. (switch, LED, ports etc..) Technical changes (improvements) up to the distribution reserve. |
Author: | EagleEye [ Thu Apr 22, 2004 10:44 pm ] |
Post subject: | |
Author: | Bullet [ Thu Apr 22, 2004 11:02 pm ] |
Post subject: | |
Author: | Worm [ Fri Apr 23, 2004 7:31 am ] |
Post subject: | |
Author: | jamie [ Fri Apr 23, 2004 7:32 am ] |
Post subject: | |
Author: | Worm [ Fri Apr 23, 2004 8:30 am ] |
Post subject: | |
No mate, the actual sheet metal fabrication and fastners are both very basic, its a simple box configuration. I get anodized stuff done all the time thats 3x the size of that and cheaper. Because I have contacts I should be able to get some prototypes done, It means I have to strip the box to get physical dims for standoffs etc. It will be harder to source the buttons, ill have a look It should be quite easy, heres a simple MINI pc construction ive recently been working on.. Will be better when I get Solidworks, which hopefully will be soon |
Author: | Bob_The_Engineer [ Fri Apr 23, 2004 8:57 am ] |
Post subject: | |
Author: | EagleEye [ Fri Apr 23, 2004 9:07 am ] |
Post subject: | |
Author: | jamie [ Fri Apr 23, 2004 5:57 pm ] |
Post subject: | |
ooooo |
Author: | jamie [ Sat Apr 24, 2004 9:33 am ] |
Post subject: | |
Author: | Worm [ Sat Apr 24, 2004 10:09 am ] |
Post subject: | |
great |
Author: | Bullet [ Sat Apr 24, 2004 4:36 pm ] |
Post subject: | |
Page 8 of 8 | All times are UTC |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |